Category Archives: greenhouse

Features of Allergic Harvest PC

The thickness of this material is 4 mm.

If you want, you can raise the period of the structure to 6 yards or longer. To try it, it is enough to attach a two-meter expansion. When picking a drawing, focus on the distance between the arches. This figure needs to be 65 cm, and which is the most appropriate length for the specified thickness of the material. The diameter of the doors in line with the manufacturer’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, then it’s important to pick a place for its place. If this is done properly, it is possible to provide yourself with a crop of fresh vegetables for the whole calendar year.

The location for the future greenhouse is marked instantly at the preparation of this garden plot. In order to melt the snow in the positioning of the greenhouse as early as possible, the best point on the website will be a small elevation. Moreover, in such a place is not going to have to be worried about higher humidity as soil and air within the structure.

Build a polycarbonate greenhouse in an elevated site – intends to look after the optimal temperatures indoors.

If it is not possible to place a greenhouse on an elevated place, you’ll need to pour a coating of fine shattered rock about 20 cm and the identical layer of fertile land to create seedbeds.

Before building a greenhouse in your backyard plot, it’s also wise to consider where and how this structure is going to be set up. First, you have to select a location for this. The greenhouse ought to be found in a metropolitan region no less than a few meters away from homes, barns and other structures.

How to install a greenhouse in Line with the sides of the world

Make sure you level the soil surface – it’s ideal to even remove the top layer. This can also eliminate weed seeds. And for simplicity of work, eliminate the soil in an area that is about a meter wider on each side of the rectangle that you desire.

Additionally, it is worth thinking about using a foundation. As manufacturers say, today most greenhouses don’t need that, particularly if they (greenhouses) are employed only in the summer and spring period. But, experienced gardeners still recommend earning a basic basis from a pub. It is extremely simple – it is sufficient to associate with each other utilizing metal screws and corners four parts of wood using a cross-section of at least 10 * 10 cm. The dimensions of such a base should be equivalent to the foundation of the upcoming greenhouse.

Simple bar base

You can also make a strip foundation of concrete. He’s more dependable than a pub foundation, but demands more fiscal and labour costs. Incidentally, the greenhouse, that will be utilised in winter, with no and don’t do without it whatsoever.

Stages of the formation of a strip foundation: a schematic representation

Many manufacturers counsel to install greenhouse structures without even building a base. Even for this use, they equip the frame with special T-shaped legs, so the structure was securely fixed. However, as practice shows, it is still necessary to build a foundation: so and the basis will be more securely fixed and the elements of the foundation that are in contact with the soil, will be kept much more in its initial condition.

The main thing is to care for the material with special agents to protect the timber from moisture. The material is usually installed on concrete cubes that are dug into the ground. For a six-meter arrangement, they need 10 pieces: four to each side and one in the center of the endings.

Before you do the greenhouse , you will need to select the right place for this. It must be an even website, so the framework was located evenly, without distortions. It should be sunny and not obscured by trees or buildings.